Lerninhalte und Abschlussarbeiten

Plattform für digitales Lernen an der HSHL

Zusammenfassung

Folgende Formeln wurden im Kapitel Grundschaltungen verwendet:

Hochsetzsteller

\[ \begin{gathered} \text{Zustand 1, Masche: } U_L = U_0 \\[6pt] \text{Zustand 2, Masche: } U_0 = U_L + U_C \rightarrow U_L = U_0 - U_C \\[6pt] \text{Bauelementgleichung Spule: } i_L(t) = \frac{1}{L} \int u_L(t)\,dt + I_{L0} \\[6pt] \text{Zustand 1: } i_C = -i_{\mathrm{Last}};\quad \text{Zustand 2: } i_C = i_L - i_{\mathrm{Last}} \\[6pt] u_C = \frac{1}{C} \int i_C(t)\,dt + U_{C0} \end{gathered} \]

Tiefsetzsteller

\[ \begin{gathered} \text{Zustand 1, Masche: } u_L = U_{\mathrm{Ein}} - U_{\mathrm{Aus}} \\[6pt] \text{Zustand 2, Masche: } u_L = -U_{\mathrm{Aus}} \\[6pt] I_L(t) = \frac{1}{L} \int U_L(t)\,dt + I_{L0} \end{gathered} \]

4QS

\[ \begin{gathered} \overline{U_{\mathrm{Last}}} = \overline{\varphi_L} - \overline{\varphi_R} \\[6pt] \overline{\varphi_L} = \text{Duty-Cycle linke PWM} \cdot U_{\mathrm{Quelle}},\quad \overline{\varphi_R} = \text{Duty-Cycle rechte PWM} \cdot U_{\mathrm{Quelle}} \\[6pt] i_L(t) = I_{L0} + \frac{1}{L} \int u_{\mathrm{Last}}(t)\,dt = I_{L0} + \frac{u_{\mathrm{Last}} \cdot \Delta t}{L} = I_{L0} + \Delta i \\[6pt] \overline{I_{\mathrm{Last}}} > 0\,\mathrm{A},\ \overline{U_{\mathrm{Last}}} > 0 \text{ oder } \overline{I_{\mathrm{Last}}} < 0\,\mathrm{A},\ \overline{U_{\mathrm{Last}}} < 0 \rightarrow \text{mittlere Leistung positiv} \\[6pt] \overline{I_{\mathrm{Last}}} > 0\,\mathrm{A},\ \overline{U_{\mathrm{Last}}} < 0 \text{ oder } \overline{I_{\mathrm{Last}}} < 0\,\mathrm{A},\ \overline{U_{\mathrm{Last}}} > 0 \rightarrow \text{mittlere Leistung negativ} \end{gathered} \]

Kurs als PDF herunterladen

Das PDF enthält alle Seiten des Kurses. Interaktive Inhalte (Lernbücher, Videos, Simulationen) gibt es nur auf der Webseite.